CharisTools

CadenceLink blog

Which machines work with CadenceLink?

Published 16 November 2026

CadenceLink: Gym Cardio Log works with any treadmill, indoor bike, rower, elliptical or climber that uses the Bluetooth FTMS standard. That covers thousands of models, but “should work” isn’t the same as “confirmed”. This page lists machines confirmed on real hardware, and it grows as users report theirs.

Last updated: 16 November 2026. Found a machine that works, or one that doesn’t? Email admin@chadava.com with the make, model and a screenshot of the machine details card.

Confirmed on real hardware

MachineTypeWhat CadenceLink showedNotes
Vision Fitness S60Commercial ellipticalSpeed, cadence (rpm), power, distance, resistance, elapsed timeReports itself as an indoor bike over FTMS, so the workout screen says “Indoor bike”. No heart rate without a strap (shows 0).

We only add a machine here after a session was recorded on it. The Vision Fitness S60 is the only confirmed machine so far.

FTMS advertised, not yet confirmed by a full session

MachineTypeStatus
Vision Fitness T600TreadmillAdvertises FTMS; a full machine profile is still being recorded

Machine types and what to expect

TypeReadings you’ll usually seeSaved to Apple Health as
TreadmillSpeed, pace, incline, distance, time, energyWalk or run, based on average speed (6.5 km/h threshold)
Indoor or spin bikeCadence, power, speed, resistance, distanceCycling
RowerStroke rate, power, distance, timeRowing
EllipticalStep rate or cadence, resistance, power, distanceCross training
Stair or step climberStep rate, floors, time, energyStair climbing or step training

Exactly which readings appear depends on what each machine sends. CadenceLink shows what’s available and hides what isn’t.

How to check your own machine in 30 seconds

  1. Wake the console by pressing any key. Many machines stop advertising when idle.
  2. Open CadenceLink and look under Nearby on the Home screen.
  3. If the machine appears, tap its name. The details card shows the maker, model, firmware, machine type and the readings it supports.
  4. Start a short session and check the numbers match the console.

If nothing appears:

  • Make sure the machine isn’t already connected to another phone or app. Most FTMS machines accept one connection at a time.
  • Tap Scan again after waking the console.
  • Check the manual for “FTMS” or third-party app support. Some brands use their own private Bluetooth protocol instead, and CadenceLink doesn’t support those.
  • Bluetooth heart-rate straps and earbuds aren’t fitness machines, so they won’t appear in the machine list. Pair heart-rate straps in Settings instead.

Reporting a machine

The most useful report includes:

  • Make and model, as printed on the machine
  • A screenshot of the CadenceLink machine details card
  • Which numbers matched the console and which didn’t
  • Where you used it, if it’s a gym (we’re building a list of gyms where it works)

Send it to admin@chadava.com. We’ll add confirmed machines to the table above. If something reads wrongly, we’ll investigate and, where it’s a quirk of that machine, work around it in an update.

Gyms where CadenceLink works

No gyms are listed yet. We will add them as reports arrive (gym name, location, machine models), and only with the gym’s permission, or where the machines are visibly branded and publicly accessible.

Brands that commonly support FTMS

Many current treadmills, bikes and rowers from mainstream brands support FTMS, especially models advertised as compatible with Zwift or Kinomap. Brand support varies by model and year, so check the specific model rather than assuming the brand. When in doubt, the 30-second check above is the definitive test.

What CadenceLink records from a compatible machine

Once a machine connects, CadenceLink saves every reading it sends during the session, not just the totals at the end. For each moment of the workout you get the speed, cadence or stroke rate, power, distance, resistance or incline, energy and heart rate the machine reported, plus where the heart rate came from. Open the session afterwards to see charts of speed, power, cadence and heart rate over time, then save the workout to Apple Health with one tap.

CadenceLink reads the machine and never controls it. Use the machine’s own controls and safety key for speed, incline and resistance.

Frequently asked questions

Does CadenceLink work with machines that say “Connects to Apple Watch”? That label means Apple GymKit, a separate system. Many of those machines also support Bluetooth FTMS, but not all do. Try the 30-second check.

Do I need the brand’s own app? No. If the machine speaks FTMS, CadenceLink connects directly, with no account.

Will it work with a Concept2 rower? The PM5 monitor has traditionally used Concept2’s own Bluetooth protocol rather than FTMS. Try the 30-second check, and if it connects, please tell us. We have not confirmed CadenceLink on a real FTMS rower yet.

Why we only list confirmed machines

FTMS gives every maker a lot of room in which fields to send and how. Two treadmills from the same brand can behave differently after a firmware update. We’d rather show a short, honest list that you can trust than a long list of guesses.

Get CadenceLink: Gym Cardio Log, free on the App Store.

Get CadenceLink: Gym Cardio Log. It is free, with no account and no ads, and it works offline.

Download on the App Store

More guides

CadenceLink Compatible Machines: FTMS Treadmills & Bikes