CharisTools

CadenceLink blog

Why your treadmill’s heart rate is wrong, and how to fix it

Published 16 November 2026

You’re running hard, breathing hard, and the treadmill says your heart rate is 72. Or it’s stuck on the same number for the whole workout. Or it jumps between 95 and 180 every time you grab the handles. You’re not imagining it: the heart-rate reading on many gym machines is unreliable. Here’s why, and what to do about it.

Where the treadmill gets your heart rate

A treadmill can only know your heart rate in one of three ways:

  1. Handgrip sensors: the metal pads on the handles measure the tiny electrical signal from your heart through your palms.
  2. A wireless chest strap: many machines have a built-in receiver for Bluetooth or older 5 kHz/ANT+ straps.
  3. Nothing at all. With no sensor and no strap, the machine has no idea, but it may still show a number.

Why the number is often wrong

Handgrip sensors are a rough guide at best. They need steady contact with both hands, dry skin isn’t great, and running motion breaks contact constantly. They’re designed for a quick check while walking, not for continuous tracking during a run.

Fixed or default values are the sneakier problem. When no strap is connected, some machines report a constant heart rate, such as 0 or a default value, instead of reporting “no data”. Apps that read the machine’s data then record that fake number as if it were real.

We have seen this on the Vision Fitness S60 elliptical, the only machine we have confirmed on real hardware so far: with no strap paired, it reported 0 bpm throughout the session. Some machines may report a plausible-looking constant instead, which is worse, because it looks real. We have not confirmed that behaviour on other models.

Strap interference and crosstalk also play a part. In a busy gym, older uncoded straps can pick up a neighbour’s signal, and a machine’s receiver can latch on to the wrong strap.

Why it matters

Heart rate feeds into calorie estimates, training zones and your Apple Health trends. One workout with a fake heart rate of 70 makes your hard session look easy and your calorie burn look tiny. A habit of logging machine heart rate quietly corrupts months of data.

How to get accurate heart rate on a treadmill

1. Wear a chest strap (most accurate)

A Bluetooth chest strap measures the heart’s electrical signal directly and is the gold standard for exercise. They’re widely available and don’t cost much. Wet the electrodes before you start.

2. Use an optical armband or a watch that broadcasts heart rate

Upper-arm optical sensors are comfortable and accurate for steady cardio. Some fitness watches and trackers can broadcast heart rate over Bluetooth to other apps. Check your watch’s settings for a “broadcast heart rate” option.

3. Make sure your app uses the strap, not the machine

This is the step most people miss. If your app reads both the machine and your strap, it should prefer the strap and ignore the machine’s number.

CadenceLink: Gym Cardio Log does exactly that. Pair your strap or armband in Settings, and its reading replaces the machine’s. Every session also records where the heart rate came from, so you can always tell a real strap reading from a machine value. If you didn’t wear a strap, you’ll know the heart rate in that session came from the machine, and you can treat it with suspicion.

4. Don’t trust handgrip readings while running

If you only have handgrips, use them for a spot check while walking at the end of your session, not as workout data.

Quick troubleshooting

  • The heart rate is stuck on one number: the machine probably isn’t receiving any signal and is showing a default. Connect a strap.
  • It shows 0: no sensor is connected. That’s honest, at least.
  • It spikes and drops: it’s likely a handgrip contact problem or strap crosstalk. Use a coded Bluetooth strap and moisten the electrodes.
  • My strap works on my watch but not the treadmill: the machine’s receiver may only support older straps. Pair the strap to your phone app instead and let the app record it.
  • I’m getting two different heart rates: you’re probably seeing the machine’s value on the console and your strap in the app. Trust the strap.

What about Apple Watch?

Apple Watch’s optical sensor is good for steady-state cardio. If you record an Indoor Run on the watch, your heart rate comes from the watch. Apple Watch doesn’t broadcast heart rate to other iPhone apps by default, though, so for an FTMS app like CadenceLink, a Bluetooth strap or armband is the simplest way to get strap-quality heart rate alongside the machine’s distance and incline.

The bottom line

The treadmill is great at measuring the belt. It’s often bad at measuring you. Let the machine provide speed, distance and incline, let a strap provide heart rate, and use an app that knows the difference.

Get CadenceLink: Gym Cardio Log, free on the App Store.

Get CadenceLink: Gym Cardio Log. It is free, with no account and no ads, and it works offline.

Download on the App Store

More guides

Why Your Treadmill's Heart Rate Is Wrong (and How to Fix It)