You finish 40 minutes on the treadmill. The console says 6.2 km, 380 kcal and a 3% average incline. Then you step off, the screen resets, and Apple Health records whatever your phone guessed from your arm swing, or nothing at all.
The machine measured everything properly, so the fix is to get its numbers into Health. Here are the three ways to do it, and when each one makes sense.
Why your phone’s estimate is wrong on a treadmill
On a treadmill, your iPhone and Apple Watch can’t use GPS, so they estimate distance from your steps and stride length. That estimate drifts. It’s worst at walking pace, on an incline, or when you hold the handrails. The treadmill, on the other hand, knows exactly how fast the belt moved and for how long. It knows the incline too, which your phone can’t see at all.
So the most accurate record of a treadmill workout is the treadmill’s own data.
Option 1: Apple GymKit (if the machine has an Apple logo reader)
Some commercial machines from brands such as Life Fitness, Technogym, Matrix and StairMaster support Apple GymKit. Look for a “Connects to Apple Watch” label and a contactless reader on the console.
- With an Apple Watch: turn on Settings › Workout › Detect Gym Equipment, then hold the watch near the reader until it taps. Start and stop the workout on the machine.
- With an iPhone: Apple’s Fitness app now supports GymKit too. Open Fitness, tap your profile, choose GymKit and turn on Detect Gym Equipment, then hold the phone near the reader.
GymKit is the smoothest option when it’s available. The catch is that only some machines have the reader, and many gyms, especially smaller and budget gyms, don’t.
Option 2: An FTMS app (works on far more machines)
Most treadmills, bikes, rowers and ellipticals sold in recent years broadcast their data over Bluetooth using a standard called FTMS (Fitness Machine Service). It’s the same signal that Zwift and Kinomap use. Any app that speaks FTMS can read the belt speed, distance, incline, time and energy straight from the machine, and many of those apps can save the workout to Apple Health.
Here’s how it works with CadenceLink, our free FTMS app:
- Make sure the treadmill console is awake (press any key) and Bluetooth is on on your iPhone.
- Open CadenceLink. The treadmill appears under Nearby on the Home screen. Tap it.
- Start walking or running. Speed, pace, incline, distance, time and energy update live.
- When you finish, tap Save session, then Save to Apple Health.
The workout appears in Health as a walk or a run, with the treadmill’s distance and energy. CadenceLink files sessions with an average speed above 6.5 km/h as runs and slower ones as walks. You also get a chart of every reading, so you can see exactly where you pushed the pace or raised the incline.
No Apple Watch is needed. If you want accurate heart rate, pair a Bluetooth chest strap or armband. We explain why in our guide to why treadmill heart rate is often wrong.
Option 3: Enter it manually
If the machine has neither GymKit nor Bluetooth, you can still log it by hand. Open the Health app, browse to Activity › Workouts, and add data, or use a workout-logging app that writes to Health. Copy the distance, time and energy from the console before it resets. It’s tedious, but it’s better than a wrong estimate.
Which treadmills have FTMS?
You can’t always tell from the outside. Signs that a machine probably has it:
- The console or manual mentions Zwift, Kinomap, “Bluetooth FTMS” or “app compatible”
- The maker has a companion app that connects over Bluetooth, not just a QR code
- It’s a recent commercial model from a mainstream brand
The quickest test is to open an FTMS app next to the machine. If it shows up, it works. CadenceLink also shows what the machine reports about itself (maker, model, firmware and which readings it supports), so you know what you’ll get before you start. See our guide: What is FTMS? We also keep a short, honest list of machines confirmed on real hardware.
Tips for clean treadmill data
- Start the app before you start the belt, so the session captures your warm-up.
- Don’t hold the handrails if you also care about your phone’s step count. The treadmill’s distance won’t change, but your watch’s estimate will.
- If the console resets its counters mid-workout (many do when the belt stops), a good FTMS app keeps a running total instead of starting from zero. CadenceLink does this automatically.
- Don’t record twice. If your Apple Watch is also running an Indoor Walk workout, you’ll get two workouts in Health. Pick one source.
Privacy
Your workout is health data. CadenceLink has no account, no ads and no internet connection. Your sessions stay on your iPhone until you choose to save them to Apple Health. GymKit also keeps your data in Apple’s Fitness app, though Apple notes that equipment makers may keep data if you’re signed in to the machine.
The short version
- The machine has a “Connects to Apple Watch” reader: use GymKit.
- The machine has Bluetooth (FTMS): use an FTMS app such as CadenceLink. It is free on the App Store.
- Neither: log it by hand from the console.