CharisTools

CadenceLink blog

What is FTMS? The Bluetooth standard behind “app-compatible” gym machines

Published 16 November 2026

If you’ve shopped for a treadmill, spin bike or rower lately, you’ve probably seen “Zwift compatible”, “Kinomap ready” or simply “Bluetooth FTMS” on the spec sheet. FTMS is the reason a machine from one brand can talk to an app from a completely different company. Here’s what it is, what it sends, and how to tell whether your machine has it.

FTMS in one sentence

FTMS (Fitness Machine Service) is an official Bluetooth Low Energy standard, published by the Bluetooth SIG, that defines how cardio machines broadcast live workout data and, optionally, accept commands from an app.

Before FTMS, each brand used its own private Bluetooth protocol, so an app had to support each brand separately. With FTMS, an app that speaks the standard can read any machine that does too.

Which machines it covers

The specification defines a separate data format for each machine type:

  • Treadmills
  • Indoor bikes (spin bikes, upright and recumbent exercise bikes, and many smart trainers)
  • Rowers
  • Cross trainers (ellipticals)
  • Step climbers and stair climbers

A machine announces which types it is and which readings it supports. That’s why an app can show incline on a treadmill and stroke rate on a rower.

What data FTMS sends

Depending on the machine type and the maker, an FTMS machine can send:

  • Speed and average speed
  • Distance
  • Incline and elevation gain (treadmills)
  • Cadence (bikes), step rate (climbers, ellipticals), stroke rate (rowers)
  • Power in watts
  • Resistance level
  • Energy (calories)
  • Heart rate, if the machine has a heart-rate receiver
  • Elapsed and remaining time

Every field is optional. A budget walking pad might send only speed, distance and time, while a commercial bike might send cadence, power and resistance. Good apps show what’s there and hide what isn’t.

Can apps control the machine?

FTMS also defines a “control point” that lets an app set the speed, incline, resistance or target power. That’s how Zwift changes your trainer’s resistance on a climb. Many makers restrict or disable control on treadmills for safety, or keep it for their own app. Some apps, including CadenceLink, deliberately only read data and never control the machine.

How to tell if your treadmill, bike or rower has FTMS

  1. Check the manual or spec sheet for “FTMS”, “Fitness Machine Service”, “Bluetooth Smart (FTMS)” or support for Zwift, Kinomap or similar apps on that machine type.
  2. Look up the maker’s companion app. If it connects over Bluetooth and the brand advertises third-party app support, FTMS is likely.
  3. Test it. Wake the console, then open an FTMS app on your phone within a couple of metres. If the machine appears in the list, it speaks FTMS.

In CadenceLink: Gym Cardio Log, nearby FTMS machines appear on the Home screen. Tap the machine’s name to see what it reports about itself: maker, model, firmware, machine type and the readings it supports. It’s a quick way to check a machine before you rely on it. See the compatible machines list for models confirmed on real hardware.

FTMS vs ANT+ vs GymKit

  • FTMS is Bluetooth Low Energy, so it works with phones and tablets directly.
  • ANT+ FE-C is an older protocol used by many smart trainers and Garmin devices. iPhones don’t support ANT+ natively.
  • Apple GymKit pairs an Apple Watch or iPhone with a machine using a contactless reader. It’s a separate Apple programme and only some commercial machines support it.

A machine can support more than one. Many smart trainers do both FTMS and ANT+ FE-C.

Common FTMS quirks

Because each maker implements the standard a little differently, you may notice:

  • Fixed heart rate. Some machines report a constant number, such as 0 or 70 bpm, when no chest strap is connected.
  • Resetting counters. Many consoles reset elapsed time and distance to zero when the belt or flywheel stops.
  • The wrong machine type. The Vision Fitness S60 elliptical — the only machine we have confirmed on real hardware so far — reports itself as an indoor bike over FTMS. The data still works, but the labels differ.
  • Sleeping consoles. Some machines stop advertising until you press a key.

A well-built FTMS app works around these. CadenceLink records where heart rate came from on every session, keeps running totals when counters reset, and uses your phone’s clock for the timeline. We go into the heart-rate issue in Why your treadmill’s heart rate is wrong.

Why FTMS matters for gym-goers

At a commercial gym you can’t plug in a laptop or run a training app on the console. But if the machine speaks FTMS, your phone can read it. That means accurate distance, incline, cadence and power in your own records, saved to Apple Health, without buying a watch or creating an account.

Try it

CadenceLink: Gym Cardio Log is a free iPhone app that reads FTMS treadmills, bikes, rowers, ellipticals and climbers and saves your session to Apple Health. No account, no ads, works offline.

Get it on the App Store.

Get CadenceLink: Gym Cardio Log. It is free, with no account and no ads, and it works offline.

Download on the App Store

More guides

What Is FTMS? Bluetooth Fitness Machine Service Explained